Edirol PCR-A30 Owner's Manual

102, 102 MIDI implementation ● Program change Status 2nd byte CnH ppH n = MIDI channel number: 0H – FH (Ch.1 – 16) pp = Program number: 00H – 7FH (prog. 1 – prog. 128) * Transmitted in Program change mode. ● Channel pressure Status 2nd byte DnH vvH n = MIDI chann…

48, 48 Using the PCR-A30 as a MIDI keyboard Selecting Sounds on a Sound Module (Sending Program Change / Bank Select Massages) To select a sound on your MIDI sound module, transmit a Program Change in Program Change mode. To select a sound from a different bank, first use Bank…

78, 78 Using the PCR-A30 as a MIDI controller 6 Transmit bulk data from your sequencer or other device. Specify “PCR” (Mac OS 9: PCR-A 1) as the MIDI output device for your sequencer software. For details on this setting, refer to the manual of your sequencer software. For detail…

44, 44 Using the PCR-A30 as a MIDI keyboard ● PLAY mode When you power up the PCR-A30, it will start up in PLAY mode. In PLAY mode, playing the keyboard will transmit note messages to play the connected MIDI device. The display will show the current channel (p. 46). In PLA…

62, Edirol PCR-A30 62 Using the PCR-A30 as a MIDI controller Advance mode 1, 2 Advanced mode 1 of PROGRAM CHANGE ASSIGN lets you specify the upper and lower limits of the program change value. Advanced mode 2 lets you transmit BANK LSB/MSB settings in addition to the program change. 1. P…

2, To resize thickness, move all items on the front cover 2 and center registration marks to left or right. USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. ..................................................…