Eiki HDT700 Owner's Manual

23, 23 ENGLISH Initial setting Network PIN code setting This is to set the Network PIN code to restrict the access from an unauthorized person through the network. Enter a 4-digit number as the Network PIN code onto the text box and click Set button. The projector begins re…

5, Eiki HDT700 ENGLISH 5 ENGLISH 1 Chapter 1 Preparation Describes features and operating environment of this projector. …

28, 28 Chapter 3 Basic Setting and Operation ✐"When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned int…

42, 42 Chapter 4 Controlling the Projector Item Description Filter control ....... Scroll the filter. Click "Roll-up", a confir- mation display appears, and then click "OK", the filter will be scrolled. Fan speed control ... Sets the running speed for the cooling f…

35, 35 ENGLISH About projector condition Status Description Normal ............................................................... Projector is operating normally. Power management in operation ........... Power management is operating Lamp failure ............................................…

2, 2 Compliance Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when …