Weider PRO Operation & User’s Manual

9, Weider PRO g. Attach a Roller (39) and two 5/16" Washers (90) between the indicatedset of holes in the Squat Slider (38) witha 5/16" x 3 1/2" Bolt (94), two 5/16" Washers (90), and a 5/16" Nylon Locknut(86) as shown. Assemble the other three Rollers (39) to the Squat…

16, 39. Route the Leg Lever Cable (75) under a 4 112" Pulley (119). Attachthe Pulley and a Large Cable Trap (121) to the indicated side oi the Buttedly Upright (3) with a 3/8" x 3 3/4" Bolt (122), a 3/8" Washer (91), and a 3/8" Nylon Jamnut (113). Make sure that the Larg…

13, 24. Remove the preettached 3 1/2" Pulleys (78) from the Offset Double "U"-bracket (61). Wrap the Swivel Cable (17) around a 3 1/2" Pulley (78). Attach the Pulley to the Offset Double "U"- bracket (61) with a 3/6" x 1 3/4" Bolt (93) and a 3/…

3, IMPORTANT PRECAUTIONS 1. Read all Instructions in rids manual and in 13. Always disconnect the lat bar from the • e aCcompanylngltterature before using the weight system when performing an exercise weight system. U1at_ not-use the lat bar. 2. It Is theresponslbmty of the owner to ensure th…

18, 49. Wrap the Swivel LowCable (72) over a 3 112" Pulley (78). Attach the Pulley and a Cable Trap (68) between the lower set of holes in the "U"-bracket (64) with a 3/8" x 2" Bolt(100) and a 3/8' Nylon Locknut(87). Make sure that the Cable Trap Is turned to hold the Cable…