Weider WEBE27320 Operation & User’s Manual

16, 16 81 44 79 66 59 WEIGHT RESTS AND SAFETY SPOTTERS To use a barbell (not included) with the weight rack, first move the Weight Rests (55, 80) and the Safety Spotters (56, 81) to the correct heights for the exer- cise to be performed. Engage the locking pins around the Front Uprights (44). 80 …

4, ASSEMBLED DIMENSIONS: Height: 84 in. Width: 67 in. Depth: 75 in. 4 Weight Carriage Front Upright Safety Spotter Weight Rest Storage Tube Backrest Bracket Right Side Left Side Note: The terms “right side” and “left side” are determined relative to a person sitting on the bench; they…

23, M10 x 68mm Bolt (26) M10 x 45mm Bolt (27) M10 x 100mm Bolt (28) M10 x 75mm Bolt (30) M10 x 86mm Bolt (35) M10 x 19mm Bolt (72) M10 x 78mm Bolt (75) M6 x 16mm Bolt (31) M4 x 16mm Screw (63) M6 Washer (37) M10 Nylon Locknut (32) M10 x 94mm Bolt (18) M6 x 53mm Bolt (29) M10 x 58mm Bolt (73) M…

5, 5 Before beginning assembly, carefully read the following information and instructions: • Assembly requires two people. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • Tighten all parts…

14, 14 28. Wet the ends of th Lat Bar (59) and the Row Bar (58) with soapy water. Slide four Handgrips (60) onto the ends of the two Bars. 29. Make sure that all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTMENTS starting on…