Eizo FlexScan S2133 Operation & User’s Manual

14, 14 Chapter 2 Adjusting Screens 2-3. Adjusting Color ● To select the display mode (FineContrast Mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose User1 Select this to dene a desired set of parameter settin…

17, 17 Chapter 2 Adjusting Screens ● To adjust gamma Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the brightness of the moni…

38, 38 Chapter 6 Reference ● Connection Procedure (Setup of USB Function) 1. Connect the monitor rst to a PC using the signal cable, and run the PC. 2. Connect the USB cable between the USB downstream port of the PC and the USB upstream port of the monitor. The USB hub function…

24, Eizo FlexScan S2133 24 Chapter 2 Adjusting Screens 2-5. Screen Size Changing ● Screen Size Changing The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using the “Screen Size” function. Setting Function Full Scr…

13, 13 Chapter 2 Adjusting Screens 2-2. Setting the Resolution When you connect the monitor to the PC and nd that the resolution is improper, or when you want to change the resolution, follow the procedure below. ● Windows 8 / Windows 7 1. For Windows 8, click the “Desktop”…

40, 40 Chapter 6 Reference Environmental Conditions Temperature Operating: 5˚C to 35˚C (41˚F to 95˚F) Transportation/ Storage: -20˚C to 60˚C (-4˚F to 140˚F) Humidity Operating: 20 % to 80 % R.H. (no condensation) Transportation/ Storage: 10 % to 90 % R.H. (no condensation) Air Pressur…