Eizo GS520-BL Operation & User’s Manual

23, 3. Adjustment and Settings 21 Mode Preset Function <Setup>-<Mode Preset> When CAL Switch mode is selected, the computer can be forced to display only specified modes. Use this function when the display modes are restricted or when the display should not be changed needlessly. [How t…

41, 1st Edition-January, 2008 Printed in Japan. 00N0L402A1 EIZO NANAO CORPORATION 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan Phone: +81 76 277 6792 Fax:+81 76 277 6793 EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630, U.S.A. Phone: +1 562 431 5011 Fax: +1 562 431 4811 EIZO E…

31, 7. Troubleshooting 29 7. Troubleshooting If a problem persists even after applying the suggested remedies, contact an EIZO dealer. • No picture problems See No.1 ~ No.2 • Imaging problems See No.3 ~ No.6 • Other problems See No.7 ~ No.9 • USB problems See No.10 Probl…

18, 16 2. Installation 2-3. Environmental Settings The monitor may need to be set in some environment. If you install it for the first time or change environment, set the monitor. • Set the signal corresponding to make a connection for non monochrome signal only specifications. �…

38, EMC Information CAUTION The RadiForce series require special precautions regarding EMC and need to be installed, put into service and used according to the following information. Do not use any cables other than the cables that provided or specified by us. Using other cables may …