Eizo RadiForce RX211 Operation & User’s Manual

16, 14 2. Cable Connection and Screen Adjustment 2-2. Connecting the signal cable NOTE •Be sure that the power switches of both the PC and the monitor are OFF. •Refer to the PC user's manual when connecting the monitor. 1 Rotate the monitor ninety degrees counter-clockwise into the …

51, Immunity test EN60601 test level Compliance level Electromagnetic environment - guidance Conducted RF EN61000-4-6 3Vrms 150kHz to 80MHz 3Vrms 150kHz to 80MHz Portable and mobile RF communications equipment should be used no closer to any part of the RadiForce series, including cable…

24, Eizo RadiForce RX211 22 3. Adjustment and Settings 3-2. ScreenManager menu Using ScreenManager menu controls the screen adjustment and settings. Refer to the “Explanation” column in the following table for each detailed functions. Functions The following table shows all the ScreenManager’s adjustment…

17, 2. Cable Connection and Screen Adjustment 15 3 Connect the power cord to the power connector on the rear of the monitor. 4 Thread the power cord and signal cable through the cable holder on the rear of the monitor stand. NOTE •When threading the cables through the cable holder, lead them t…

50, EMC Information CAUTION The RadiForce series require special precautions regarding EMC and need to be installed, put into service and used according to the following information. Do not use any cables other than the cables that provided or specified by us. Using other cables may…

32, 30 4. Color Adjustment and Image Adjustment Adjustment Contents Menu Description Adjustable Range Brightness Sets the brightness of the screen 0~120% Temperature (p. 45) Sets the color temperature 6000K~15000K in 500Kincrements (including 9300 K). Tips • The values shown in the Kelvin (K…