Wheelock SP4-RMX Installation Instructions Manual

2, P84557 D Sheet 2 of 14 Two SP4-RMX modules can be ganged together when connecting them to an SP40/2 panel. This provides a maximum of six remote microphones providing “All Call” for the entire system. One SP4-RMX can be connected to each audio booster providi…

10, P84557 D Sheet 10 of 14 Configuration: The following table describes the switch and jumper settings on the SP4-RMX Table 1: Switch and Jumper Descriptions Switches Remarks SW1 – SP40/SPB Select Selects SP40 or SPB use SW2 S1 - Priority ON – S…

9, P84557 D Sheet 9 of 14 Instructions for Connecting to an Audio Booster Panel NOTE: The SP4-RMX cannot be connected to an Audio Amplifier (SPB) with a PC board revision “K” or lower. The SP4-RMX can only be connected to SPB PC board with revisions “N” or hi…

12, P84557 D Sheet 12 of 14 TROUBLESHOOTING: The SP4-RMX contain yellow LED indicators that, when illuminated, indicate a trouble condition. A trouble condition will also occur on the SP40/2. LED trouble indication on the SP40/2 when the SP4-RMX is connect…

8, Wheelock SP4-RMX P84557 D Sheet 8 of 14 ALL CONNECTIONS BETWEEN SPB AND RMX ARE SUPERVISED. THESE CONNECTIONS MUST BE RUN IN NO MORE THAN 20FT OF CONDUIT AND WITHIN THE SAME ROOM. R E F E R T O F I G U R E 3 F O R S…

14, P84557 D Sheet 14 of 14 Limited Warranty Wheelock products must be used within their published specifications and must be PROPERLY specified, applied, installed, operated, maintained and operationally tested in accordance with these instructions at the time…