Weed Eater SG Series Instruction Manual

6, Weed Eater SG Series 6 SERVICE REPLACING THE LINE S Disconnect unit fromthe power source. S Remove the s pool by firmly pulling on the tap button. S Clean entire surface of hub and spool. S Replace with a pre-wound spool, or cut a length of 30 feet of 0.065 diameter Weed Eater r brand line. Use of heavier line could …

4, 4 Tools built with this insulation system are not intended to be grounded. No ground- ing means is provided on this unit, nor should a means of grounding be added to this unit. As a result, the extension cord used with your unit can be plugged into any standard 120 volt electrical out…

8, 8 LIMITED WARRANTY ELECTROLUX HOME PRODUCTS, INC., warrants to the original purchaser that each new Weed Eater r brand elec - tric or cordless product is free from de - fects in material and workmanship and agrees to repair or replace under this warranty any defective Weed Eater bra…

7, 7 TROUBLE CAUSE REMEDY Semi-automatic head stops under a load or does not turn when switch is pressed. 1. Allow tip of line to do the cutting. 2. Contact your authorized service dealer. 3. Check Breaker Box. 4. Remove debris. Line does not advance or breaks while cutting. 1. Check line routing.…

2, 2 SAFETY RULES WARNING: When using electric gardening appliances, basic safety pre- cautions shouldalways befollowed tore- duce the risk of fire, electric shock, and serious injury. Read and follow all instructions. SAFETY INFORMATION ON THE UNIT This power unit can be dangerous! Opera-…