Vivotek IP3135 Operation & User’s Manual

55, - 53 - www.vivotek.com enupnp anything Enable UPnP function. This option must be resent whenever the URL is called, if UPnP function is to be enabled. Video configuration URL URL: /setup/video.cgi NAME VALUE DESCRIPTION text <text string sho…

11, - 9 - www.vivotek.com Primary user’s capability Main Screen with Camera View The main page layout has two parts: Configuration functions: The camera can be configured using these user interfaces. Camera View: What the camera sees. Click on the configurati…

5, Vivotek IP3135 - 4 - www.vivotek.com DDNS and UPnP settings...................................................................35 Video codec parameters....................................................................35 Motion detection.....................................…

7, - 5 - www.vivotek.com Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. Hardware i…

34, - 32 - www.vivotek.com Network settings Any changes made on this page will restart the system in order to validate the changes. Make sure every field is entered correctly before clicking on . "Reset IP address at next boot", the defa…

45, - 43 - www.vivotek.com Appendix A. Troubleshooting Status LED After powering up, the Network Camera performs a self-diagnostic to detect any hardware defects. The following table lists the LED patterns in general. In case of any fatal error, the LED will bli…