Vixen Viper-MC90L Instruction Manual

10, In this case, an image that is seen in the finder scope appears in the same orientation as is seen by the naked eye. 2-5 When a target object comes into the center of the cross hair lines in the finder scope while looking into the eyepiece (diagonal mirror), …

7, 5. Applying power supply 5-1 Turn on the power supply. (Fig. 12) 2) How to use 1. Moving the telescope Move the telescope by using the joystick type controller, which is connected to the main body. Depending on the degree of inclination of the stick, the telescope can be move…

5, 1-3 Hold the optical tube with the eyepiece section facing you and the optical tube dovetail plate is on the right. (Fig. 4) E.<epiece - section - 1-4 Insert the optical tube dovetail plate onto the dovetail slide bar of the upper and lower revolving dovetail. Fasten the op…

12, Vixen Viper-MC90L 3-7 Pull up the mirror shift lever. (Fig. 33). <Fig.34> ' ViePiilVJ ill?,?!~" 0f Fi111:el T,II get Velticdl Hor izo~ltdl Shift level 3-8 Bring an object into the center of the cross hairs by operating the joystick controller while looking into the finder scope. 3-9 A…

9, Uie~illq i~lldcje of eyepiece lells(cli.~cjo~~,ll inir lo1 I . 2-4 To align the field of view of the finder scope and eyepiece together, look into the finder scope steadying the telescope (Fig. 22). Adjust the finder scope by turning the three finder adjustment thumbsc…