DataCard ImageCard series Operation & User’s Manual

74, Troubleshooting 6-5 # Obtain guidance from service before performing this task. User’s Guide for Express™ and Select™ Class Printers Card is printed upside down (the image is rotated 180 degrees). The card creation application has rotated the card. The card rotation setti…

110, 5 Index User’s Guide for Express™ and Select™ Class Printers Windows NT autodetect print ribbon 5-3 Default Document Properties 3-3 install printer driver 2-11 network permissions 5-9 PC settings C-3 permissions C-3 reinstalling the printer driver 5-1 …

31, Getting started 2-17 User’s Guide for Express™ and Select™ Class Printers See “Magnetic stripe encoding” on page D-1 for more information about magnetic stripe tracks. • The tracks available depend on the type of module installed. If you are not satisfied with the appearance of the tes…

78, Troubleshooting 6-9 User’s Guide for Express™ and Select™ Class Printers Obtaining service For repair assistance, contact your service representative. Place the service call from a telephone close to the printer so that you can access the printer and the PC running the driver while tal…

19, Getting started 2-5 User’s Guide for Express™ and Select™ Class Printers The interface cable must be a shielded, Type C, IEEE 1284 parallel port cable, up to a maximum of 2 meters long. If the PC has more than one parallel port, make sure you use the ECP capable parallel port on the PC…

76, DataCard ImageCard series Troubleshooting 6-7 # Obtain guidance from service before performing this task. User’s Guide for Express™ and Select™ Class Printers Topcoat applied using the print ribbon You might apply topcoat to the card using a T panel as part of the print ribbon. Part or all of the printed …