Vodavi Starplus Triad-S Installation Manual

59, Vodavi Starplus Triad-S 4-6 Keyset Self Test 2. Press the dial pad keys to display an LCD message that indicates wh ich digit was pressed. Depressing the H-T-P switch from one position to another displays one the following words: H_POS, T_POS, or P_POS. 3. Test LEDs independently of the Keys by pressing the flex LED butto…

48, SMDR 2-31 If theSMDR featureis enabled, the system starts collecting information about the call as soon as it starts and terminates when the call ends. If the call was longer than 30 seconds, the following information is printed: Table 2-3: SMDR Printout 30 character forma t sel ecte d: …

52, Preliminary Procedures 3-3 Preliminary Procedures 1. Make sure theBasic Key Service Unit (BKSU) is properly grounded to coldwaterpipeorearthground. 2. Verify that all expander modules are firmly seated onto their connectors. 3. Inspect the MDF for shorted wiring and improper polari…

67, 4-14 Remote Maintenance Figure 4-3:Station Configuration CO Line Configuration Figure 4-4 illustrates a representation of what is printed out for slot two when aLCOB is installed in that slot and: The installer typ es d<space>s2 at th e maint>prompt. Column Indicates: 1StationNumber 2…

15, 1-4 Regulatory Information (U.S.A.) Changes in Service The local telephone company may make changes in its communications facilities or procedures. If thesechanges should affect theuse of the Triad-S System or compatibility with the network, the telephone company must givewritten no…

10, March 2001 ix MISU Dip Switches ......................................................................................................... 2-19 CKIB/CSIB Wiring ............................................................................................................. 2-24 SMDR Printout ......…