Manual, Performance Data Sheet for Whirlpool WHES20 Water Dispenser, Water System (1 pages)
Data: UPD 10th October 2023
Whirlpool WHES20 Water Dispenser, Water System PDF Performance Data Sheet (Updated: Tuesday 10th of October 2023 09:15:27 PM)
Rating: 4.3 (rated by 31 users)
Compatible devices: WHES30, WHKMD40, WHES33, HD1000XSC7, EveryDrop EDRD101G1W, 8LIECH-BP-WL, WHED10, 8LIECH-SCSSFP5W.
Recommended Documentation:
Text Version of Whirlpool WHES20 Water Dispenser, Water System Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 10 October 2023)
Demand Control Water Softeners Performance Data Sheet
Model WHES20 WHES30
Rated Service Flow Rate (gpm) 6.5 8.0
Pressure Drop at Rated Service Flow Rate (psi) 9.3 14.4
Rated Softening Capacity (Grains @ Salt Dose)
8,700 @ 1.7 lbs
16,400 @ 5.4 lbs
20,100 @ 9.1 lbs
14,700 @ 2.9 lbs
25,400 @ 8.0 lbs
30,100 @ 13.1 lbs
Rated Efficiency (Grains/Pound of Salt @ Minimum Salt Dose) 5000 @ 1.7 lbs 5000 @ 2.9 lbs
Min.-Max. Working Pressure (psi) 20-125 20-125
Min.-Max. Operating Temperature (°F) 40-120 40-120
Max. Flow Rate (gpm) to Drain During Regeneration Cycle 2.0 2.0
These softeners conform to NSF/ANSI 44 for the specific performance claims as verified and substantiated by test data. These models are efficiency rated. The efficiency rating is
valid only at the stated salt dose. It has a demand initiated regeneration (D.I.R.) feature that complies with specific performance specifications intended to minimize the amount of
regenerant brine and water used in their operation. These softeners have a rated softener efficiency of not less than 3,350 grains of total hardness exchange per pound of salt (based on
sodium chloride) and shall not deliver more salt than its listed ratings or be operated at a sustained maximum service flow rate greater than its listed rating. This softener has been
proven to deliver soft water for at least ten continuous minutes at the rated service flow rate. The rated salt efficiency is measured by laboratory tests described in NSF/ANSI
Standard 44. These tests represent the maximum possible efficiency that the systems can achieve. Operational efficiency is the actual efficiency after the system has been installed. It
is typically less than the efficiency due to individual application factors including water hardness, water usage, and other contaminants that reduce the softener’s capacity.
IMPORTANT: Consult Installation and Operation Manual for California efficiency requirements. These systems are not intended for treating water that is microbiologically
unsafe or of unknown quality without adequate disinfection before or after the systems. For best results use clean grades of water softener salt. Refer to Installation and Operation
Manual for warranty or further details on installation and maintenance, user’s responsibility, parts and service, and any further restrictions, or limitations to the use of the product.
Manufactured and warranted by Ecodyne Water Systems
1890 Woodlane Drive
Woodbury, MN 55125
1-866-986-3223
05/26/11 (Rev. J)
7274058
Systems tested and certified by NSF International
against NSF/ANSI Standard 44 for hardness
reduction and efficiency.
System tested and certified by the Wate
r
Quality Association against CSA, B483.1.
Demand Control Water Softeners Performance Data Sheet
Model WHES20 WHES30
Rated Service Flow Rate (gpm) 6.5 8.0
Pressure Drop at Rated Service Flow Rate (psi) 9.3 14.4
Rated Softening Capacity (Grains @ Salt Dose)
8,700 @ 1.7 lbs
16,400 @ 5.4 lbs
20,100 @ 9.1 lbs
14,700 @ 2.9 lbs
25,400 @ 8.0 lbs
30,100 @ 13.1 lbs
Rated Efficiency (Grains/Pound of Salt @ Minimum Salt Dose) 5000 @ 1.7 lbs 5000 @ 2.9 lbs
Min.-Max. Working Pressure (psi) 20-125 20-125
Min.-Max. Operating Temperature (°F) 40-120 40-120
Max. Flow Rate (gpm) to Drain During Regeneration Cycle 2.0 2.0
These softeners conform to NSF/ANSI 44 for the specific performance claims as verified and substantiated by test data. These models are efficiency rated. The efficiency rating is
valid only at the stated salt dose. It has a demand initiated regeneration (D.I.R.) feature that complies with specific performance specifications intended to minimize the amount of
regenerant brine and water used in their operation. These softeners have a rated softener efficiency of not less than 3,350 grains of total hardness exchange per pound of salt (based on
sodium chloride) and shall not deliver more salt than its listed ratings or be operated at a sustained maximum service flow rate greater than its listed rating. This softener has been
proven to deliver soft water for at least ten continuous minutes at the rated service flow rate. The rated salt efficiency is measured by laboratory tests described in NSF/ANSI
Standard 44. These tests represent the maximum possible efficiency that the systems can achieve. Operational efficiency is the actual efficiency after the system has been installed. It
is typically less than the efficiency due to individual application factors including water hardness, water usage, and other contaminants that reduce the softener’s capacity.
IMPORTANT: Consult Installation and Operation Manual for California efficiency requirements. These systems are not intended for treating water that is microbiologically
unsafe or of unknown quality without adequate disinfection before or after the systems. For best results use clean grades of water softener salt. Refer to Installation and Operation
Manual for warranty or further details on installation and maintenance, user’s responsibility, parts and service, and any further restrictions, or limitations to the use of the product.
Manufactured and warranted by Ecodyne Water Systems
1890 Woodlane Drive
Woodbury, MN 55125
1-866-986-3223
Systems tested and certified by NSF International
against NSF/ANSI Standard 44 for hardness
reduction and efficiency.
System tested and certified by the Wate
r
Quality Association against CSA, B483.1.
05/26/11 (Rev. J)
7274058
Recommended:
MP350, Punch 30, HPM-500, 27HC1R P
KHS-HS2 689 03 001, X-CALIBER XR-124, 1320, MAX200, Mark 100, Hydro-Guard HG-4
-
V1V1V1+V2V1+V2++++//Einbau- und Bedienungsanleitung KEMPER KHS-HS2 Hygienespülung Figur 689 03 001 | 689 03 002 | 689 03 003 | 689 03 004DE EN FR NL Installation and Operating instruction KEMPER KHS-HS2 Hygiene Flushing BoxFigure 689 03 001 | 689 03 002 | 689 03 003 | 689 03 004Instructi ...
Model & Doc Type: KHS-HS2 689 03 001 24
-
GC-AW 6333Art.-Nr.: 41.767.30 I.-Nr.: 110157D Originalbetriebsanleitung HauswasserautomatGB Original operating instructions Automatic domestic water systemF Mode d’emploi d’origine Systeme automatique d‘eau a emploi domestiqueI Istruzioni per l’uso originaliCentralina i ...
Model & Doc Type: GC-AW 6333 96
-
SunMor SM-V30 Solar Water Heater Installation Manual by Congratulations on the purchase of your new SunMor SM-V30 from Nature’s Comfort LLC! You must read this entire instruction manual before beginning installation to completely understand system requirements. Aquasta ...
Model & Doc Type: SunMor SM-V30 4
-
ROPV R80 S Series Manual August 2005B HARBIN ROPV INDUSTRY DEVELOPMENT CENTER ROPV R80 S Series User Manual For Use with the Following ROPV Pressure Vessel Models: R80 600S R80 800S R80 1000S R80 1200S Headquarters Harbin R ...
Model & Doc Type: R80 S Series 18
Operating Impressions, Questions and Answers:
