ECS GF8200A Manual 

51, 45 Using BIOS Save & Exit Setup Highlight this item and press <Enter> to save the changes that you have made in the Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears, select [OK] to save and exit, or select [Cancel] to return to the main…

33, 27 Installing the Motherboard ATX12V: ATX 12V Power Connector Pin Signal Name 4 +12V 3 +12V 2 Ground 1 Ground SPK: Internal speaker header 4 Signal 3 GND 2 Key 1 VCC Pin Signal Name …

58, 52 Using the Motherboard Software Manual Installation Insert the CD in the CD-ROM drive and locate the PATH.DOC file in the root directory. This file contains the information needed to locate the drivers for your motherboard. Look for the chipset and motherboard model; then browse to the direc…

7, ECS GF8200A 1 Introducing the Motherboard Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the GF8200A motherboard. This motherboard is a high performance, enhanced function motherboard that supports socket for AMD Phenom TM processor (socket AM2+)/AMD Athlon TM 64 X…

44, 38 Using BIOS Soft-off by PWR-BTTN (Instant off) Under ACPI (Advanced Configuration and Power management Interface) you can create a software power down. In a software power down, the system can be resumed by Wake Up Alarms. This item lets you install a software power down that is con- trolled by…

4, ii Preface Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interfer- ence that may cause u…