VTech PHONES PACKAGE I6720 Quick Installation Manual

Parts checklist:
Check to make sure the phone’s package includes the following:
1. AC power adapter 
2. Charger  
3. Handset
4. Battery compartment cover
5. Belt clip
6. Battery
7. Quick installation guide
Install handset battery
NOTE:
•  Use only the VTech battery and AC power adapter supplied with this unit or the 
recommended equivalent.
•   If you are not going to use the telephone for a long period of time, remove the 
battery to prevent possible leakage.
• Do not open or mutilate the battery. Released electrolyte is corrosive and may  Do not open or mutilate the battery. Released electrolyte is corrosive and may 
cause damage to the eyes or skin. It may be toxic if swallowed.
• Exercise care in handling batteries in order not to create a short circuit with  Exercise care in handling batteries in order not to create a short circuit with 
conducting materials such as rings, bracelets, and keys. The battery or 
conductor may overheat and cause burns.
             
1. Align the two holes in the plug with the socketpins, matching the red and the 
black connectors, then snap plug into place.
2. Place  the  battery  in  the  compartment  with  the  wires  in  the  upper  right 
corner.
3. Neatly tuck the wires next to the battery inside the battery compartment.Neatly tuck the wires next to the battery inside the battery compartment.
4. Replace cover by sliding it upwards until it clicks into place.Replace cover by sliding it upwards until it clicks into place. 
Connect power to handset charger 
Choose the location for your handset charger, and plug charger adapter into an 
electrical outlet not controlled by a wall switch. 
Charge the handset battery
Place the handset in the base unit.base unit.. CHARGING... will display on handset. Be 
sure to charge the battery for at least 16 hours before using your telephone.
Registration
De-register all handsets
•    Press and hold FIND HANDSET on the base unit for four seconds, the IN 
USE light will light up.
•  Keep  pressing FIND HANDSET  for another six  seconds until the IN  USE 
, then release the FIND HANDSET button.
•  Press and release FIND HANDSET again. The IN USE light will turn off and 
in a few seconds, all handsets will be de-registered.
-
ister all your handsets, then register the new handset and re-register all the old 
handsets one at a time.
Register a handset
•    When the handset shows NOT REGISTERED, place 
the handset on a base unit or charger that is connected 
to  a  power  outlet.  The  handset  screen  will  display 
PRESS FIND HNDST 4 SEC ON BASE. 
•  Press  and  hold  FIND  HANDSET  on  the  base  unit 
until the IN USE light comes on. (It takes at least four 
seconds).  
•  Release FIND HANDSET once the IN USE light comes 
on.  
Note:
•   If the de-register process does not work, you may need to reset the system 
and try again. To reset: pick up the handset and press TALK/ /FLASH. 
Then, press the OFF button and place the handset back into the base unit. 
 
before registering to base unit. 
NOTE:
•  Return the handset to the base unit when not in use to ensure optimum 
performance.
To attach
To remove
NOT RIGISTERD
PRESS FIND HNDST 
4 SEC ON BASE
3. Handset 
1. AC power adapter 
2. Charger
5. Belt clip
6. Battery
 
4.   Bat te r y  compar t ment 
cover
After a while the handset will emit series of tones, the newly registered handset 
will be assigned the lowest extension number not previously assigned to another 
system  handset when successfully registered. Repeat the steps in Register 
a handset if the new handset does not successfully register to the base unit 
within two minutes.
NOTE:
•   To purchase replacement batteries, visit us on the web at www.vtechphones.
com or call VTech Communications, Inc. at 1 (800) 595-9511. In Canada, go 
to www.vtechcanada.com or call VTech Telecommunications Canada Ltd. at 
1 (800) 267-7377.
7.  Q u i ck   i n s t al la t i o n 
guide
Belt clip
Align the pins on the inside edge of the clip with the notches on the sides of the 
handset. 
On the i6725 base:
On the i6765/75/85/86 base:
On the i6725 base:
On the i6765/75/85/86 base:
Quick installation guide
i6720
Important:
If this product is not working properly:
1. Visit our website at www.vtechphones.com or in Canada, 
    www.vtechcanada.com.
2. Call our customer service at 1-800-595-9511 or 1-800-267-7377 in Canada. 
NOTE:
•  If PRESS FIND HNDST 4 SEC ON BASE does not appear on the screen after 
a few seconds, lift up handset and place in base unit or charger again.

• 
  Bosch HEI7032U - 30" Slide-In Electric Range

  HEI7032U - 30" Slide-In Electric Range Cooktop - #89PVKM

  HEI7032U - 30" Slide-In Electric Range, 128, bosch/hei7032u-30-slide-in-electric-range.pdf

• 
  Desa 375-F

  Desa User Manual Heater 375-F (#6NV9S4)

  375-F, 36, desa/375-f.pdf

• 
  Zebra ZC100 Series

  Printer ZC100 Series Tutorial, #Y9Q5TT

  ZC100 Series, 34, zebra/zc100-series.pdf

• 
  Enterasys FN100

  #21WNU8: FN100 Document

  FN100, 2, enterasys/fn100.pdf

• 
  Gemini PMX-80

  Gemini Guide Music Mixer PMX-80 (#77W49C)

  PMX-80, 9, gemini/pmx-80.pdf

• 
  Toyota AVALON

  Toyota Handbook: AVALON (#1869O2)

  AVALON, 6, toyota/avalon.pdf

• 
  Drolet WOODSTOVES

  Drolet Cooktop Manual (#426MC7)

  WOODSTOVES, 27, drolet/woodstoves.pdf

• 
  Electrolux B3051-5

  #I826AS: B3051-5 User Guide

  B3051-5, 32, electrolux/b3051-5.pdf

• 
  Whirlpool LSQ8000JQ0

  Handbook (LSQ8000JQ0, #97317I)

  LSQ8000JQ0, 14, whirlpool/lsq8000jq0.pdf

• 
  Pro-Form ZE 9

  #M725T7: ZE 9 Reference Book

  ZE 9, 32, pro-form/ze-9.pdf

• Search YouTube Videos for VTech PHONES PACKAGE I6720 Device
• Search Google for VTech PHONES PACKAGE I6720 Information
• Search Photo of VTech PHONES PACKAGE I6720 in Google Images
• Search Twitter for VTech PHONES PACKAGE I6720 News