Elmo PTC-200C Instruction Manual

31, - 30 - 13. SUPPLIED ACCESSORIES Pan/Tilt Other Item Specifications Pan range Left 150° Right 150° Tilt range Up 30° Down 90° Pan Tilt Speed Auto/manual (8 speed) Item Specifications Title setting Provided (Camera/preset selection) Daisy chain connection Max 223 (PTC-200C) cameras I…

24, - 23 - DIP Switch (4) ALL CLEAR SWITCH 1 OFF 234 BASE OF MAIN UNIT DIP Switch (4) 8. ALL CLEAR SWITCH The PAN-TILT settings, the LENS settings, the preset settings, the ID settings and the Camera settings by means of the OSD can be reset to the factory-settings by turning ON the sw…

26, - 25 - 10. TERMINATING RESISTANCE AND ID ADDRESS SETTINGS The ID address of the RS-485 and the terminating resistance can be set by using the switches Nos. 1 through 9 of the DIP Switch (10) located on the bottom of the Main Unit. Switch No. 1 – 8 9 10 Function Sets the ID address. Turns ON/OFF …

5, - 4 - CONTENTS IMPORTANT SAFETY INSTRUCTIONS .........................................1 HANDLING PRECAUTIONS ............................................................3 1. PART NAMES AND FUNCTIONS....................................................5 2. WIRELESS REMOTE CONTROLLER ...........…

15, - 14 - [1] Power supply to the Camera The Camera has no POWER switch. Power is supplied to the Camera when the AC adapter is connected to the wall socket and the Camera. When power is supplied to the Camera, the Camera turns to the right and then to the center automatically (viewed fr…

11, Elmo PTC-200C - 10 - • Make 4 holes of 8mm (5/16 in.) to the Ceiling Tile as shown. 70mm (2-3/4 in.) 102mm (4 in.) 54mm (2-1/8 in.) FRONT BACK CEILING TILE (t 1/2 in. 1 in.) t = thickness MOUNTING HOLE 8mm (5/16 in.), 4 LOCATIONS (2) Making mounting holes to the Ceiling Tile …