Elmo HV-8000SX Instruction Manual

3, - 2 - Grounding or Polarization – This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will fit into the power outlet only one way. …

28, - 27 - To present the material with a little half tone such as documents. Images with sharp characters and lines contrasty with background can be obtained. When the contrast button [CONTRAST] on the operation panel is pressed, the indicator lamp lights up, and the image becomes contrasty. When…

40, Elmo HV-8000SX - 39 - Initialization of the network settings If the connection from the network is disabled due to destruction of the network settings or disremembering of the set value, reset the settings to the factory settings by using the following procedure and then redo the settings: • If the Prese…

29, - 28 - Operation panel IRIS OPEN IRIS CLOSE MOVE IRIS NORMAL PRESET LAMP Wireless remote control Iris To adjust the Auto iris level of the lens. Press the iris button [OPEN] on the operation panel or the iris open button [IRIS OPEN] on the wireless remote control, and the iris will ope…

31, - 30 - Powered Manual Focus To focus on specific part of the material, such as 3-D material. Press the focus button [NEAR] or [FAR] on the operation panel or the focus button [FOCUS NEAR] or [FOCUS FAR] on the wireless remote control. Note: The auto focus functions up to approx. 10cm (3…

30, - 29 - FOCUS NEAR FOCUS FAR TELE WIDEZOOM Operation panel Wireless remote control Focus Auto Focus Press the auto focus button [AUTO FOCUS] on the front panel or the auto focus button [AF] on the wireless remote control, and the auto-focus will be activated. While the auto-focus is in opera…