Winbook XP5 Operation & User’s Manual

58, Action: A)Use the Setup program to select the (default) Auto or the Simulscan display mode; B)Press'Fn'+'FlO'to switch active display; C)Make sure you plugged in the CRT monitor before you powered up the WinBook. D)Press 'Fn' + 'F6' to force display to Si…

49, support for the external PS/ 2 port. The default setting is "Enabled." If you disable this setting none of them will work. [XP5 6-9] HDD Block mode HDD Block Mode accelerates disk transfers. A performance improvement is especially noticeable with applications that utilize the multiple s…

83, the file or line you're working on. Insert Command:'Ins'or'Fn'+'M' The Ins key is used in editing and word processing programs. It inserts material into a text passage so that it overwrites text to the right of the insertion point. Some software pa…

59, B)Select Advanced Setup screen (screen 3); Enable PS/ 2 pointing device. Check if any external PS/2 devices are plugged into the duplex adapter. Check if the external PS/ 2 device is defective, by unplugging it and retrying. a If the system is plugged into the docking station, unplug and retry. …

66, Winbook XP5 Battery pack is defective, call the service number listed on your "Read-Me-First" sheet for details on ordering a replacement battery. The battery charge circuit inside the WinBook is defective. Call the Technical Support number listed on the WinBook "Read-Me-First&quo…