Enterasys ANG-3000 Manual, Application Note

53, Application Note IPSec Sample Configuration on the ANG-3000/7000 Series AVN-AN-CLI-R11 Page 53 of 64 ikePolicy -a -n policy1 -e main -p PSK Next, define the preshared keys for each side. These keys are used when initiating an IPSec/IKE tunnel and when responding to a tunnel creatio…

17, Application Note ANG Configuration Commands AVN-AN-CLI-R11 Page 17 of 64 ircpptp PPTP Example Example List ircrip RIP Point-to-Point Tunneling Protocol (PPTP) uses Point-to-Point Protocol (PPP) and Generic Routing Encapsulation (GRE) to route packets through the Internet. Usage ircpptp -1 -4 -c…

38, Enterasys ANG-3000 Page 38 of 64 AVN-AN-CLI-R11 IPSec/IKE Commands Application Note ANG Configuration Using the Command Line Interface ipsecDefault IPSec Default The IPSec engine in the ANG and remote ANG acts as the External interface's firewall. Its proper configuration is vital to the security…

20, Page 20 of 64 AVN-AN-CLI-R11 ANG Configuration Commands Application Note ANG Configuration Using the Command Line Interface Example List after the modification ircsts Site-to-Site Example ircstatic -l 1 10.10.3.0 255.255.255.0 192.168.4.1 Sets up Remote ANG site-to-site connections by first adding a…

31, Application Note IPSec/IKE Commands AVN-AN-CLI-R11 Page 31 of 64 Figure 1 Internet Key Exchange Hierarchy Each object must be named and some objects have references to other objects by name. (This “points to” attribute is illustrated by the indentation in the preceding figure). Some ob…

18, Page 18 of 64 AVN-AN-CLI-R11 ANG Configuration Commands Application Note ANG Configuration Using the Command Line Interface Example Example List ircstatic Static Routes -a None, Simple Define the RIP Authentication type -p Password Define the RIP Authentication Password -g IP Address List…