Enterasys 2E42-27 Manual, Appendix

5, FLASH Download Configuration Screen PN 9033215 B-5 Reboot After Download (Toggle) Set the SmartSwitch device so it will either reboot or not reboot after completing the download of an image. This field toggles between YES and NO, when the Download Method field is set to RUNTIME…

1, PN 9033215 B-1 APPENDIX B FLASH DOWNLOAD CONFIGURATION SCREEN Firmware revision 4.10 changed the FLASH Download Configuration screen to allow configuring the SmartSwitch device to upload or download a configuration file to or from a TFTP server. This appendix applies to the Smart…

7, FLASH Download Configuration Screen PN 9033215 B-7 B.1.2 Configuration File Download Using TFTP To download a configuration file from a TFTP server to the SmartSwitch device, proceed as follows: 1. Use the arrow keys to highlight the Download Method field. 2. Us…

2, Enterasys 2E42-27 Appendix B: LM Security Screens B-2 PN 9033215 Before downloading an image to the device, copy the image to the network TFTP server. The download and upload configuration capability enables customer configurable settings to be copied from one SmartSwitch device to another via …

4, Appendix B: LM Security Screens B-4 PN 9033215 Field Definitions Refer to Table B-1 for a functional description of each screen field. Table B-1 Screen Field Descriptions Use this field… To… Download Method (Selectable) Select a method (RUNTIME, DOWNLOAD CONFIG,…