Enterasys 802.1Q Operation & User’s Manual

7, Figures v Figure Page Figures 1-1 Example of a VLAN .........................................................................................................1-2 2-1 Inside the Switch ....................................................................................................…

74, Example 4, Isolating Network Traffic According to Protocol 4-14 Examples 8. Bridge 1 receives the frame and recognizes User B’s MAC address. The frame is forwarded to the correct port and the bridge’s Source Address Table is updated with an entry for the Mail Server’s MAC address. User B …

50, Enterasys 802.1Q Protocol VLAN Configuration Screen 3-28 VLAN Configuration 2. Enter the VLAN ID. If a new VLAN ID is entered that has not been created on the switch, use a unique number between 2 and 4094. The VLAN IDs of 0, 1, and 4095 may not be used for user-defined VLANs. A FID will automatically be a…

20, VLAN Switch Operation 2-4 VLAN Operation 2.4.1 Receiving Frames from VLAN Ports When a switch is placed in 802.1Q Operational Mode, every frame received by the switch must belong, or be assigned, to a VLAN. Untagged Frames The switch receives a frame from Port 1 and examines the…

43, VLAN Forwarding Configuration Screen VLAN Configuration 3-21 Screen Example Figure 3-8 VLAN Forwarding Configuration Screen Field Definitions Table 3-5 VLAN Forwarding Configuration Screen Field Definitions Use this field … To … Current VLAN Ports (Read-Only) See the ports t…