TAG MIL-BOOK 10 Series Operator's Manual

26,  Through the Expansion Port Plug of the CD-ROM Drive Module – Insert the USB plug of floppy disk drive into the USB port located on the expansion port plug of the CD-ROM drive module. Operating Your Tablet PC 2-11 …

95, Simultaneous display does not work.  Make sure that you turn on the external monitor before turning on the computer.  Check the Setup item Display Mode on the Main menu of the SCU program is configured correctly. Floppy Disk Drive Problems The Floppy Disk Drive In-use Indic…

8, Turning On and Off the Computer Turning On 1. Make sure the computer is connected to AC power. 2. Press the power button . 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start. Turning O…

17, Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button . A computer starts up with an operating system (OS) existing on the storage device such as the hard disk; or from a fl…

44, TAG MIL-BOOK 10 Series 4. Slide the release lever (  ) to the right and pull the battery pack out of its compartment () by using your thumb and index finger. 5. Insert the new battery pack into the compartment and slide the release lever first to the right to accommodate it, then releasi…

100,  Make sure that the printer’s signal cable is properly connected.  Make sure that the printer driver is correctly installed.  Make sure that you have assigned the printer port correctly in your operating system or application program.  Make sure that the printer port i…