Saeco Primea Touch Plus Operation And Maintenance Manual

41, 39CLEANING AND MAINTENANCE 1 2 3 1 6 54 MAINTENANCE DURING OPERATION During normal operation, the “empty dreg drawer” message may appear. This operation must be performed when the machine is on. If the coffee grounds drawer is emptied with the machine off or when it is not signalled on the …

49, 47 • Never direct the jet of hot water and/or steam towards yourself or others. Danger of scalding. • Do not insert objects through the appliance’s openings. (Danger! Electrical Current!). • Do not pull out the plug by yanking on the power cord or touching it with wet hand…

21, 19 “LANGUAGE” MENU For changing the language of the display. This function was described at the beginning of the manual. This setting is of fundamental importance for correctly adjusting the parameters of the machine according to the country where the machine is used. language…

31, 29 add cleaner to milk conteiner milk cleaning cycle cleaning... milk cleaning cycle Fill the milk container with fresh water up to the «max» level. 7 8 Position an adequately sized container under the milk spout. The wash cycle starts automati- cally. Wait for the wash cycle to fi nish. 9…

51, Saeco Primea Touch Plus Saeco International Group S.p.A. Via Torretta, 240 I-40041 Gaggio Montano, Bologna Tel: + 39 0534 771111 Fax: + 39 0534 31025 www.saeco.com The manufacturer reserves the right to change the features of the product without prior notice. © Saeco International Group S.p.A. Type SUP030ADR Cod.1…

20, 18 PROGRAMMING THE MACHINE MACHINE SETTINGS When the machine settings are selected the following screen appears. Here you can: set the language of the menus. set the illuminate cups function. set the machine operation through the water fi lter set/activate the tones. set the water hardnes…