Saeco SG200E Operation And Maintenance Manual

51, 51 English - manually rotate using the wrench supplied with the machine until the lower filter is flush with the cup (fig. 57). - unscrew screw (1) and replace filter (2) (fig.57). - reassemble all the parts following the reverse order. Important Carefully blot the upper and lower fi…

25, Saeco SG200E 25 English fig.38, rif.1 fig.38, rif.2 fig.38, rif.3 fig.38 - connect the coiner to the CPU card NOTE: Executive, MDB and BDV serial systems are connected to the CPU card using a cable and an interface in necessary, both included in the special kit. - Then enter the programming menu so…

8, 8 English CUP DISPENSER suitable for cups with 70-71 mm dia. and for cups with 73 mm dia. through an adequate release ring. BOILER HEATING ELEMENTS armoured types: from 1,000 Watt for coffee boiler CONTAINER CAPACITY Coffee beans 2.0Kg Instant coffee 0.6 Kg (instead of tea) Granular…

24, 24 English fig.36 fig.37 7 - PAYMENT SYSTEM INSTALLATION 7.1 Payment system installation on the machine The vending machine has no payment system. The responsibility for possible damages to the machine and other objects and for personal injuries caused by an incorrect installation of …

28, 28 English SYSTEM MANAGEMENT VM CODE 0000 VM CODE >0000< STOP STOP COFFEE 00000 LIM:00321 STOP BEVERAGE STOP GROUNDS 00000 LIM:0090 RESET >Y< N BEVERAGE A 00000 LIM. 000111 BEVERAGE B 00000 LIM. 000222 BEVERAGE C 00000 LIM. 000333 BEVERAGE D 00000 LIM. 000444 BEVERAGE…

12, 12 English 1 2 3  the gear motor of the instant product activates the screw, dispensing the desired amount of product into the mixer.  once the pre-set amount of water and product is dispensed, the mixer is disconnected. ESPRESSO COFFEE BREWING This process take…