Envision EN-5200e Operation & User’s Manual

19, EN-5200e 19 31MY02 EN-5200e Appendix Connector Pin Assignment Pin Number Description Pin Number Description 1Red9+5V 2 Green 10 Detect Cable 3Blue11NC 4 Ground 12 DDC-Serial Data 5 Ground 13 H-Sync 6 R-Ground 14 V-Sync 7 G-Ground 15 DDC-Serial Clock 8 B-Ground …

6, EN-5200e 6 31MY02 EN-5200e Before You Operate the Monitor Connecting the Wires Using the Power Cord Supplied 1. Connect the built-in video cable into the 15-pin connector on the back of your computer and tighten the two screws. 2. Connect the power cord into your LCD monitor&apos…

10, EN-5200e 10 EN-5200e 31MY02 Operating Instructions Front Panel Buttons Auto: Press this button to automatically set the H-Position, V-Position, Clock and Focus settings. Brightness: Press this button to adjust the picture’s brightness. If the OSD window is open, this button allows you…

12, EN-5200e 12 31MY02 EN-5200e Operating Instructions Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC us…

5, Envision EN-5200e EN-5200e 5 31MY02 EN-5200e Before You Operate the Monitor Installing & Removing the Base General Features: • 38.1cm(15") TFT Color LCD Monitor • Crisp, Clear Display for Windows • Supports Resolutions up to 1024 X 768 pixels @75Hz, (1024 x 768 @ 60Hz Recommended) • EPA ENERGY ST…

13, EN-5200e 13 31MY02 EN-5200e Technical Support (FAQ) Problem Possible Solution Power LED is not ON • Make sure the power button is ON. • Make sure the power cord is properly connected to a grounded power outlet and to the monitor. No Plug & Play • Confirm that your computer is Plug …