Envision EN-770e Operation & User’s Manual

11, EN-770e 11 31MY02 EN-770e Technical Support (FAQ) Problem Possible Solution Power LED is not ON • Make sure the power button is ON. • Make sure the power cord is properly connected to a grounded power outlet and to the monitor. No Plug & Play • Confirm that your computer is Plug & Pla…

12, EN-770e 12 31MY02 EN-770e Appendix Specifications CRT Size 17.0" (43.2 cm) 11.4” (29 mm) neck 0.21mm(H), 0.25mm(D) dot pitch 90 degree deflec- tion Viewable image size 16.0” (40.6 cm) diagonal Preset Display area 11.8” (300 mm) X 9.1” (230 mm) Dot Clock 110 MHz Maximum Reso…

4, EN-770e 4 31MY02 EN-770e For Your Safety General Notes • Do not install the monitor near heat sources such as radiators or air ducts. • Do not place monitor in direct sunlight or in areas with excessive dust, mechanical vibration or shock. • Save the original shipping carton and…

2, EN-770e 2 31MY02 EN-770e For Your Safety FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in …

15, Envision EN-770e EN-770e 15 31MY02 EN-770e Appendix Connector Pin Assignment Pin Number Description Pin Number Description 1Red9NC 2 Green 10 Ground 3 Blue 11 Monitor Ground 4 Ground 12 DDC-Serial Data 5 Ground 13 H-Sync 6 R-Ground 14 V-Sync 7 G-Ground 15 DDC-Serial Clock 8 B-Ground …

8, EN-770e 8 EN-770e 31MY02 Operating Instructions Front Panel Buttons Exit: Press this button to save changes and close the OSD window. Brightness: Press this button to adjust the picture’s brightness. If the OSD window is open, this button allows you to move within the window and select…