Sagem MF9300 Operation Manual

34, 32 COPY FUNCTIONS 6 Make sure that a suitable paper size is automatically selected, or select another size using the [PAPER SELECT] key. If AUTO PAPER SELECT is enabled, the appropriate copy paper size is automatically selected based on the original size and selected copy ratios. 7 Select t…

79, 77 PERIPHERAL DEVICES AND SUPPLIES 6 FINISHER (SG-FN3) When an optional finisher (SG-FN3) is installed, the machine can automatically staple the sorted copies. Each collated set of copies or group of copies can be stacked offset from the previous set. (Offset function p.35) Part names Speci…

86, 84 Paper type................................................... 15, 19, 20 Paper weight ........................................................... 15 Part names and functions - Operation panel ............................................... 10 Peripheral devices..........................…

32, Sagem MF9300 30 REDUCTION/ENLARGEMENT/ZOOM There are three ways to enlarge and reduce copies: ● Automatic ratio selection according to the paper size ........................... AUTOMATIC RATIO SELECTION (below) ● Specifying a ratio with the reduce key, enlarge key, or zoom key...............…

87, 85 Preparations Bypass tray, loading paper in...................................18 Document cover, removing ......................................24 Initial settings, returning to .......................................14 Paper size, changing................................................19 Pape…

72, 70 TROUBLESHOOTING AND MAINTENANCE MISFEED IN THE UPPER EXIT AREA (when a job separator tray kit or finisher (SG-FN3) is installed) If a job separator tray kit or a finisher is installed, a misfeed may occur in the upper exit area. 1 Open the upper right side cover. 2 Gently pull the m…