Sagem D86C Operation & User’s Manual

6, Sagem D86C 6 YOUR TELEPHONE Banner icons Icons Indication Antenna symbol for indication in range. It is ON when the base is found. It blinks when the handset is out of range or searching for a base. Battery symbol for indicating 3 different battery levels. Handsfree speakerphone. It is ON whenever the…

7, 7 YOUR TELEPHONE Connecting the base Place the base where it should be located. Plug the telephone line connector (as shown in the illustration) into the telephone socket under the base and connect the other end to the telephone wall socket. Connect the power connector under the base and the other e…

28, 28 SETTINGS Default BS When you reset your base, all the base parameters are reset to their initial values (factory settings). -Press OK, Confirm icon appear on the display. -Press OK to confirm. Flash Time If you connect your telephone to a private automatic branch exchange or…

20, 20 PHONEBOOK OPERATIONS - Press soft key " OK " to delete the entry (Delete all entry). SIM copy - Insert SIM card into base units. - Press the soft key " " in the standby mode to enter Phonebook. - Press soft key "Option" to select "Copy from SIM"…

23, 23 -Press Menu. - Press Navigation (up/down/left/right) button to select Sound Setting. -Press OK. - Press Up or Down button to select one of the below item: Handset Volume HS Ring Internal Ring BS Ring Tone Handset Volume -Press OK to enter Earpiece/Speaker setting. - Press Up or Do…

32, 32 All of this data is provided to you for information purposes only. Sagem Communication reserves the right to make any changes without notice. Telephone features Number of channels 10 x 12 = 120 Autonomy Radio frequency band 1,88 - 1,90 GHz standby time 180 hours Duplex mode TDMA t…