Epic Fitness 425 Mx Treadmill Operation & User’s Manual

25, TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on S OLUTION: a . Make sure t…

21, 21 When the first segment ends, all target heart rate settings will move one column to the left. The tar- g et heart rate setting for the second segment will then be shown in the flashing Current Segment c olumn. During both heart rate programs, the console will regularly compare you…

11, 1 1 THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- i cone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessi…

7, 7 2. Insert the Right Upright (74) into the indicated bracket on the Base (83); be careful not to dislodge the Cage N uts (76) from the Right Upright (see the inset draw- ing). In addition, be careful not to pinch the Upright W ire Harness (75). F inger tighten three Upright Bolts (72) with th…

8, Epic Fitness 425 Mx Treadmill 8 4 5 48 5. Attach the Catch (5) to the left side of the Frame (48) with two 3/4” Screws (4). With the help of a second person, raise the Frame (48) to a vertical position. B e careful not to raise the Frame past the vertical position. Have the other person hold the Frame until…