EPOX KP6-FX2 Operation & User’s Manual

33, 33 3-6 INTEGRATED PERIPHERALS Award BIOS SETUP 3-14 ROM PCI/ISA BIOS INTEGRATED PERIPHERALS WARD SOFTWARE, INC. IDE HDD Block Mode : Enabled USB Controller : Disabled IDE Primary Master PIO : Auto USB Keyboard Support * : Disabled IDE Primary Slave PIO : Auto IDE Secondary…

19, 19 The KP6-FX 2 supports different type of settings for the system memory. There is no jumper nor connector needed for memory configuration. The following figure provides all possible memory combinations. SIMM = 4MB, 8MB, 16MB, 32MB, 64MB, 128MB Fastpage or EDO mode SIMM DIMM = …

10, KP6-FX 2 1-4 1-3 KP6-FX 2 Form-Factor Overview EPoX KP6-FX 2 is designed with ATX form factor - the latest industry standard of chassis. The ATX form factor is essentially a Baby-AT baseboard rotated 90 degrees within the chassis enclosure and a new mounting configuration for the …

25, 25 Award BIOS SETUP 3-6 Disabled: Video shadow is disabled. • C8000 - CBFFF Shadow : CC000 - CFFFF Shadow: D0000 - D3FFF Shadow: D4000 - D7FFF Shadow: D8000 - DBFFF Shadow: DC000 - DFFFF Shadow: These categories determine whether optional ROM will be copied …

27, 27 Award BIOS SETUP 3-8 • DRAM RAS Only Refresh: Permits queuing up to four DRAM refresh requests, so DRAM can refresh at optimal times. The default value is Dis- abled. Enabled: The DRAM Refresh type is RAS only. Disabled: The DRAM Refresh type is CAS before RAS. • ECC Checking/Generation: T…