Orient BTP-M170 Operation & User’s Manual

26, BTP-M170 User’s Manual - 21 - 6 Interface Signal 6.1 Parallel Interface The parallel interface is unidirectional which supports BUSY/ACK handshaking protocol. Its connector is DB25 needle type. Pin Signal definition PIN1 nStrobe PIN 2 Data 0(LSB) PIN 3 Data 1 PIN 4 Data 2 PIN …

13, BTP-M170 User’s Manual 4 Installing 4.1 Unpacking When unpacking, you should check whether all parts are present and undamaged in accordance with the packing list. If any part is missing or damaged, please contact SNBC or your local agents. 4.2 Installing Position and Direction of the…

12, Orient BTP-M170 BTP-M170 User’s Manual e- ERROR LED Indicate all error status. Under normal conditions, ERROR LED is always off; under error conditions, ERROR LED will flash. f- POWER LED Indicate power status (on/off). When turning on printer, POWER LED is always on; when turning off p…

25, BTP-M170 User’s Manual it in time.  Do not use alcohol or gasoline to clean any parts of the printer.  During the clearance, be careful not to spread dirt onto screw rod or other transmission parts. 5.2.3 Lubricating the printer Lubricant position and model: 1) Inject 013 lubr…

9, BTP-M170 User’s Manual 2.2 Paper Specification 2.2.1 Continuous paper 1) Normal paper ¾ Paper width: 76±0.5mm/69.5±0.5mm/57.5±0.5mm ¾ Max. paper roll O/D: Φ83 mm ¾ Paper roll core: Φ12.5mm ¾ Paper thickness: 0.06—0.085mm 2) Multi-layer paper (1 original +2 copies) ¾ …

28, BTP-M170 User’s Manual - 23 - 7 Troubleshooting If the printer works abnormally, consult the troubleshooting table below. If there are still problems that can not be solved, please contact SNBC or your local agents for assistance. 7.1 Printer doesn’t Work Problems Possible causes Solution…