Tekkeon myPower All plus P3450-10 Operation & User’s Manual

11, Tekkeon myPower All plus P3450-10 USER GUIDE Connect the Portable Device 1. Connect the adapter tip into the power jack on the portable device. 2. Slide the ON/OFF switch to ON to turn on myPower ALL Plus. 3. Turn on the portable device and use it as you would normally. While connected, myPower ALL Plus will po…

5, 3 USER GUIDE Getting to Know myPower ALL Plus Storing myPower ALL Plus Lithium polymer batteries must be used consistently for maximum performance. Therefore, if you do not use the battery often, you should complete a charge cycle (discharge/recharge the battery) once a month. myPower …

4, 2 Overview myPower ™ ALL Plus MP3450i is a rugged, high-capacity lithium polymer battery for use with instruments or industrial equipment. This universal battery provides instant power for devices that require between 5V and 19V, and is targeted to users who prefer a fixed voltage tha…

13, Troubleshooting If myPower ALL Plus does not power the portable device or charge the device battery, take these steps: 1. Verify that the current consumption of the portable device is not more than 4.0 Amp. If the device consumes more than the maximum provided by myPower ALL Plus, the device wi…