Temco DV5200MB Installer/consumer Safety Information Manual

16, 16 Temco DV5200 Series 78674 7. If an attic space (insulated or not) is located above the ceiling, the firestop should be installed to the underside of the ceiling. The firestop maintains the proper air-space clearance from the vent to insula- tion and building materials. An at…

14, 14 Temco DV5200 Series 78674 No more than (4) 90° and (2) 45° offsets are to be used per installation. Vent terminal cap location should be in accordance with the Venting Graph chart and the Verti- cal Termination Location information. 1. Measure the total wall thickness. Determine whether …

40, 2695 Meadowvale Blvd. • Mississauga, Ontario, Canada L5N 8A3 800-668-5323 • www.cfmcorp.com CFM Corporation …

35, 35 Temco DV5200 Series 78674 DV5200MB (continued) Always include correct name, part number, valve manufacturer, model number and serial number of the appliance when ordering service parts. If you desire to communicate with the factory, write to Customer Service at: CFM Corporat…

38, 38 Temco DV5200 Series 78674 TEMCO FIREPLACE PRODUCTS DIRECT VENT FIREPLACES INSTALLATION AND STARTUP CHECKLIST Installer’s Copy NOTE: TEMCO Fireplace Products gas logs and fireplaces require installation by a qualified gas appliance installer. A copy of this checklist must …

31, Temco DV5200MB 31 Temco DV5200 Series 78674 6. Relight the main burner in both the HI and LO posi- tions, and verify proper burner ignition and opera- tion. 7. Check inlet and manifold pressures. Loosen screw in test port 1/2 turn to measure pressure. Tighten screw when measurement is complete. Pressure ra…