Thecus N2200XXX Operation & User’s Manual

75, 75 Create a RAID On the RAID Information screen, press the create button to go to the CREAT RAID screen. In addition to RAID disk information and status, this screen lets you make RAID configuration settings. Using Create RAID, you can select stripe size, choose which disks are RAID…

32, 32 1U4600R: The rear panel of the 1U4600R houses most of the USB and Ethernet connections, as well as the eSATA port, system fan, and power connector. See the table below for descriptions of each: Power Connector Power Connector Power Switch …

123, 123 A description of each item follows: Web Service Item Description HTTP (WebDisk) Support Enable or disable WebDisk support. Enter the port number if this option is enabled. The port number is default 80. HTTPs (Secure WebDisk) Support Enable or disable secur…

109, Thecus N2200XXX 109 ACL setting Item Description Deny Denies access to users or groups who are displayed in this column. Read Only Provides Read Only access to users or groups who are displayed in this column. Writable Provides Write access to users or groups who are displayed in th…

51, 51 Chapter 4: System Administration Overview The Thecus IP storage provides an easily accessible Web Administration Interface. With it, you can configure and monitor the Thecus IP storage anywhere on the network. Web Administration Interface Make sure your network is connected …

125, 125 Auto Module Installation Or choose the Auto Module Installation item and the available system Module screen appears. The default to get module list is “On-line” so if Thecus IP storage is capable to connect to Internet then it will automatically link to Thecus official w…