Thermador M271ES Installation Manual

13, English 11 Electrical Connection The four-wire connection is preferred, but where local codes permit, the three wire connection is also acceptable. Four-wire Connection • Connect the red oven wire to the red electrical supply wire (hot wire). • Connect the black oven wire to the blac…

4, Thermador M271ES English 2 Be sure your appliance is properly installed and grounded by a qualified technician. Installation, electrical connections and grounding must comply with all applicable codes. Related Equipment Safety Remove all tape and packaging before using the appliance. Destroy th…

5, English 3 Preparation Before you Begin Tools and Parts Needed • Phillips head screwdriver • Measuring tape • Drill with bit (1/8") Parts Included • Phillips head screws (6) 27” Appliances General Information Power Requirements The outlet must be properly grounded in accordance with …

35, Español 3 Instalación Antes de empezar Herramientas y piezas necesarias • Destornillador con cabeza Phillips • Cinta métrica • Taladro con broca (1/8") Piezas incluidas • Tornillos con cabeza Phillips (6) Electrodomésticos de 27" Información general Requisitos de electricid…

40, Español 8 Horno combinado con cajón calentador de 30" Cuando el horno está instalado al final de un gabinete, junto a una pared perpendicular o a una puerta del gabinete, se aconseja dejar un espacio de al menos 1/4" entre el costado del horno y la pared/ puerta. Pa…

10, English 8 Combo Oven with Warming Drawer 30” It is good practice, when oven is installed at the end of a cabinet run, adjacent to a perpendicular wall or cabinet door, to allow at least 1/4” space between the side of the oven and the wall/door. For oven support, install 2x4’s exten…