Powerware 5115 Operation & User’s Manual

13, 500 - 1400 VA User’s manual 1015715 Revision B 13 USB Port The UPS can communicate with a USB-compliant computer using LanSafe Power Management Software (v4.15 or higher). To establish communication between the UPS and a computer: 1. Connect the USB cable to the USB port on the UPS rear …

16, Powerware 5115 500 - 1400 VA User’s Manual 1015715 Revision B 16 Fig. 9 Swapping batteries 750/1000 VA 1400 VA 500 VA …

17, 500 - 1400 VA User’s manual 1015715 Revision B 17 Recycling the Used Battery Contact your local recycling or hazardous waste center for information on proper disposal of the used battery. Scrapping the UPS Before scrapping UPS battery bank must be removed. Local requirements must be foll…

8, 500 - 1400 VA User’s Manual 1015715 Revision B 8 3. Plug the equipment to be protected into the UPS output receptacles. DO NOT protect laser printers with the UPS because of the exceptionally high power requirements of the heating elements. 4. Start the UPS by pressing the button. The indica…

4, Class B EMC Statements FCC Part 15 NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential ins…

14, 500 - 1400 VA User’s Manual 1015715 Revision B 14 5. UPS Maintenance UPS and Battery Care For the best preventive maintenance, keep the area around the UPS clean and dust–free. If the atmosphere is very dusty, clean the outside of the system with a vacuum cleaner. For full battery life…