GDC Group 230 VAC Manual, User Instructions

10, TECHNICAL PARAMETERS Model: TH132-AF Supply: 230 VAC 50 Hz Load - resistive: 16 A max. - inductive (necessitates use of SNUBBER AC 130-03): 2 A max. Power: 3680 W at 230 VAC Approvals: EN60730-2-9 EN50081-1 / EN50082-2 Display range: …

9, d) Example 2: Setting of comfort temperature Monday to Friday from 6:15 to 8:15 and from 17:00 to 22:00, on Saturday and Sunday from 7:30 to 23:00 Prog./day Monday Tuesday Wednesday Thursday Friday Saturday Sunday PROG. 1 6:15 6:15 6:15 6:15 6:15 7:30 7:30 PROG. 2 8:15 8:1…

11, GDC Group 230 VAC THERMOSTAT FAULT DESCRIPTION FORM To speed up the proceedings, please specify the fault. Description of the switched load, wattage (for example: heating mat, 1 400 W): Put a cross next to the fault; you can also add details. The thermostat is attach…

5, Connection diagram for the AC 130-03 filter The snubber must be connected into the circuit of the thermostat if the thermostat switches induction load – e.g. in the case of connection of the load via the contactor. Connect the snubber as close as possible,…

6, Connecting the temperature sensor Connect the wires of the temperature sensor to the terminals on the rear side of the thermostat (no polarity needs to be respected). Note: Do not install the floor probe immediately next to a heating element. Insert the probe betwee…

8, Day by day schedule programming The thermostat allows the setting of 4 different programmes for each day of the week. There are no pre-set programmes. The programs are designed in such a way that they perfectly adapt to your life style. The principle is very simple. F…