Fairchild CAM/CMOS-2K.LS Operation & User’s Manual

14, Fairchild CAM/CMOS-2K.LS SECTION 3 Camera Control 3.1 Quick Start with the Camera Link TM Interface Follow your Frame Grabber manufacturer’s instructions when inserting the frame grabber card into your PC. Be sure that you install the correct configuration software that matches the camera that you are …

19, Command Definition Summary CBR Change Baud rate This function allows user to select baud rate LED Light Emitting Diode Change LED state GDA Get DAC All Returns current DAC setting as a voltage SDN Set DAC number Change DAC (n) value GDN Get DAC number Get DAC (n) valu…

26, SECTION 4 Mechanical and Optical Guidance Figure 4.1 4.1 Camera Dimensions and Mounting Facilities The CAM/CMOS – 2K.LS camera housing is manufactured with high precision. Planar, parallel, and angular sides guarantee precise mounting with high repeatability. The CAM/CM…

38, Power Per the standard, power is not provided on the CameraLink TM connector of the camera. Power is supplied through the Hirose connector. Port Assignments See Tables 3.4.1 for the options of using the CAM/CMOS - 2K.LS with CameraLink TM . In CameraLink TM , a port is defined as an 8-bit…

16, SSM This command allows you to set the Sync mode. When selecting the option you need, enter the appropriate single digit number, and then hit enter. Value Function The camera returns …………..…..1 Free run 2 External Sync 3 Ext…