Yukon 26057T Use Manual

4, • When finished, turn off the riflescope by turning the selector switch (3) to the “OFF” position and replace the objective lens cap (2). • It is possible to mount the scope onto the firearm using a special bracket (9); after the initial mounting is performed, it is importan…

8, IR illuminator do not turn off via the selector switch on the scope. remote control. illuminator using the remote control. The aiming point shifts after firing rounds. The riflescope is not mounted securely. Check how securely the riflescope has been mounted and make sure t…

1, DISTINGUISHING FEATURES OF THE PHANTOM • Five (three - if EMP66G-2 tube employed) readily available configurations of illuminated red-on- green reticles that are able to be switched at a moment's notice • Functions with one AA (1.5V) or CR-123 (3V) battery • A…

6, Yukon 26057T http://www.mil-dot.com/Mil_Dot_User_Guide.htm http://www.shooterready.com/mildot.swf TECHNICAL INSPECTION It is recommended to inspect the riflescope before every use. Make sure to check for the following: • Visually inspect the unit is free from any physical dam…

7, STORAGE Always store the unit in its carrying case in a dry, well-ventilated space. For prolonged storage, remove the batteries. TROUBLESHOOTING Listed below are some potential problems that may occur when using the PHANTOM. Carry out the recommended checks and troublesh…