Fire-Lite LDM-32F Instruction Manual

45, Configuration Appendix B: MS-9200 LDM-32F PN 50055:C 03/20/01 45 Alarm Only Annunciation of Points The tables below illustrate the configuration of the LDM Series modules to annunciate the alarm state of all 99 points (detectors or modules) with the first eight points of address ‘01’ dedicat…

47, Configuration Appendix B: MS-9200 LDM-32F PN 50055:C 03/20/01 47 Alarm /Trouble Annunciation of Points The table below (also see Figure 30 on page 44) illustrates the configuration of the LDM Series modules to annunciate the alarm and trouble states for all 99 points (detectors or modules) with…

12, 1. Introduction Features 12 LDM-32F PN 50055:C 03/20/01 Connectors J1 - Switch Matrix Up to 16 optional external control switches and a local lamp test switch may be attached to the LDM-32F and LDM-E32F via J1 as shown in Figure 16 on page 24. In the Sensiscan 2000, the control swit…

17, LDM-32F PN 50055:C 03/20/01 17 2. Installation External Cabinets The CAB-A3F and the CAB-B3F are UL listed cabinets suitable for use in graphic annunciator applications. For size and dimensions, refer to the CAB- 3F Series Installation Document. Select and remove the appropri…

40, Appendix A: Sensiscan 2000 Control Switch Operation 40 LDM-32F PN 50055:C 03/20/01 Control Switch Operation Circuit corresponds to a specific I/O module installed in user configured Sensiscan 2000. The first 8 control switches of the LDM-32F will correspond to CPU switch functions as shown belo…