Firex FADC Operation & User’s Manual

10, REPAIR CAUTION: Do not attempt to repair this smoke alarm. Doing so will void your warranty. If smoke alarm is not operating properly, see “TROUBLESHOOTING.” If necessary and if still under warranty, return smoke alarm to Invensys Controls Americas. Pack it in a well-padded…

4, Firex FADC FOR BEST PROTECTION, WE RECOMMEND THAT YOU INSTALL A SMOKE ALARM IN EVERY ROOM. In addition, we recommend that all smoke alarms be interconnected. Typical Efficiency Home (Apartment) • Install a smoke alarm on the ceiling or wall closest to the sleeping area. Typical Mobile Home NOTE: F…

7, 10. Position smoke alarm to mounting plate and turn clockwise to lock into place. For tamper-resist, use long-nosed pliers to remove thin plastic from notch on smoke alarm edge. Insert pin into notch on edge of smoke alarm after smoke alarm is positioned properly in base. 11. Remove arr…

8, FALSE ALARM CONTROL Model FADC features a False Alarm Control that, when activated, quiets unwanted alarms for up to 15 minutes. To use the False Alarm Control: Press and release the test button during an unwanted alarm. The alarm should stop within ten seconds. The RED LED will blink…

6, HOW TO INSTALL THIS SMOKE ALARM DANGER: ELECTRICAL SHOCK HAZARD. Turn off power at the main fuse box or circuit breaker by removing the fuse or switching the circuit breaker to the OFF position. WARNING: This smoke alarm should be installed only by a qualified electrician. Smoke alarm wi…