Dell PowerVault DR4100 Manual, Qiuck Setup

Setting Up Your Dell DR4100 System
1
Before You Begin
An active network with available Ethernet cables and connections.• 
If the system has a 1 GbE NIC, connect all four NIC ports (two LOMs and two ports on the NIC card).• 
If the system has a 10 GbE NIC, connect both the 10 GbE ports (two ports on the NIC card).• 
NOTE: Do not connect to 1 GbE ports if there is a 10 GbE NIC available on the system.
NOTE: Use CAT6e copper cables with a 10 GbE NIC.
Network values r
equired are IP addressing, Network Mask, Default Gateway, DNS Suffix, Primary (and • 
Optional) DNS server, and Host Name. If DHCP is selected, these values are populated based on your 
DHCP configuration. If DHCP is not selected, the values must be manually configured.
Default values for the DR4100 are:• 
Default Static System IP: 10.77.88.99 -
 NOTE: Default static system IP is used only when there is no DHCP server. The default IP can be used 
to configur
e the system using a point to point NIC connection. 
Subnet mask IP: 255.0.0.0  -
Default iDRAC IP: 192.168.0.120 -
  NOTE: For default iDRAC connection, login name is root and password is calvin.
On the first boot, you must set up the network and the host name for the Dell DR4100 system.• 
Y
ou must connect the Dell DR4100 system to a keyboard and monitor when you setup the system for • 
the fi rst time. After the operating system and network are confi gured, the system can be managed using 
a remote browser interface.
To set up the Dell DR4100 system, use an account with administrator privileges.• 
2
Preinstallation Requirements
1. Install the Rails for the Dell DR4100 System
For information about installing the rails for the Dell DR4100 system, see the 
Rack Installation Instructions
 that shipped with the rail kit.
2. Set Up the Dell DR4100 System
For information about setting up the Dell DR4100 system, see the 
Dell DR4100 Getting Started Guide
 that shipped with the system.
3. Install the Cable Management Arm (CMA) (Optional)
For information about installing the CMA, see the 
CMA Installation Instructions
 
that shipped with the CMA kit.
4. Log on to the System
The default user name is administrator and the default password is Stor@ge!
5. Confi gure the Network
The Initial System Confi  guration Wizard prompts you to confi gure the system, when you log on for the fi rst time. To confi gure the network:
a.  Type yes and press <Enter>.
b.  Choose either DHCP or static IP addressing.
To select DHCP, type Yes at Would you like to use DHCP and press <Enter>. To select static IP addressing, type no and press <Enter>. 
If you choose static IP addressing, you will be prompted to enter the static IP address. Enter the static IP address and press <Enter>.
For static IP address, enter a subnet mask, a default gateway address, a DNS su  x, and a primary DNS address.
You are also asked if you want to confi gure a secondary DNS address.
The Initial System Confi  guration Wizard displays a confi rmation screen with all the values you entered in this step.
c.  To change the default host name, type Yes and press <Enter>.
NOTE: The default host name is 
DR4100-<Service Tag>
.
The Initial System Confi  guration Wizard displays a screen with the selected interface, IP address choice, host name for the Dell DR4100 system, and the values you set 
during step b on confi guring the network.
d.  To accept the settings, type Yes and press <Enter>. 
3
Installing the Dell DR4100 Hardware and Confi guring the Network
WARNING: Before you set up and operate your Dell system, review the safety instructions that came with your system.
Check for documentation and information updates on support.dell.com/manuals.
Always
 read the updates fi rst because they often supersede information in other documents.
Dell Software License Agreement
Before using your system, read the Dell Software • 
License Agreement that came with your system.
If you do not accept the terms of the agreement, • 
call the customer assistance telephone number. 
For customers in the United States, call 
800-WWW-DELL (800-999-3355). For customers 
outside the United States, visit support.dell.
com and select your country or region from the 
bottom of the page.
Locating Your System Service Tag
Your system is identified by a unique Express • 
Service Code and Service Tag number. The 
Express Service Code and Service Tag are 
found on the front of the system. Pull out the 
information tag to view the Express Service 
Code and Service Tag.
Save this information for future reference. This • 
information is used by Dell to route support 
calls to the appropriate personnel.
NOTE: The illustrations in this document are not 
intended to r
epresent a specifi c system.
Verifying Your Solution 
Dell DR4100 includes:
System bezel• 
Power cords (2)• 
Power cord retention straps (2)• 
Mounting rails (2)• 
Cable management arm (optional)• 
User documentation• 
Important Updates
NOTE: After you complete setting up the Dell DR4100 system, check support.dell.com/support/downloads for any system software updates.
Apply the updates before using the system for the fi rst time.
To update the system software, download the •  DR4100 Upgrade File from support.dell.com/support/downloads and apply the upgrade using the web console or CLI. 
To reinstall the system, download the •  Dell DR4100 Restore Manager from support.dell.com/support/downloads.
Documentation
The following documents are available for you at support.dell.com/manuals:
The • 
Getting Started Guide
 also shipped with your system provides an overview of setting up your system, and technical specifications.
The rack documentation included with your rack solution describes how to install your system into a rack, if required.• 
The • 
Dell DR4100 Administrator’s Guide
 helps you manage your DR4100 solution.
The • 
Dell DR4100 CLI Guide
 gives you a comprehensive list of all commands to run your DR4100 solution.
For hardware issues, see the • 
Dell DR4100 Owner’s Manual
.
For issues and resolutions for your Dell DR4100 solution, see the • 
Release Notes
.
For the full name of an abbreviation or acronym used in this document, see the • 
Glossary
.
4
Additional Information
Printed in the U.S.A.
© 2012 Dell Inc. All rights reserved. 
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly prohibited. 
Dell™, the DELL logo, and PowerVault™ are trademarks of Dell Inc..
2012 - 11

• 
  Accusplit 705MX

  Accusplit Watch Manual (#5ULN51)

  705MX, 1, accusplit/705mx.pdf

• 
  The box PA110

  Speakers PA110 Handbook, #S535XZ

  PA110, 4, the-box/pa110.pdf

• 
  Viking RVER330

  User Manual (RVER330, #725797)

  RVER330, 14, viking/rver330.pdf

• 
  DeLonghi XU400

  DeLonghi User Manual Oven XU400 (#C511J1)

  XU400, 9, delonghi/xu400.pdf

• 
  DSC ALEXOR

  DSC User Guide Security System ALEXOR (#89MZ8T)

  ALEXOR, 5, dsc/alexor.pdf

• 
  Toa CP-66

  Toa Guide Intercom System CP-66 (#VP85FT)

  CP-66, 6, toa/cp-66.pdf

• 
  Komet KPT

  Irrigation System Tutorial #6668T6

  KPT, 2, komet/kpt.pdf

• 
  Rabbit 2000

  Rabbit Guide: 2000 (#LVP43M)

  2000, 174, rabbit/2000.pdf

• 
  Broan 114

  Broan Thermostat Manual (#GP5X3Z)

  114, 4, broan/114.pdf

• 
  Hobbico 900

  #529J63: 900 Handbook

  900, 4, hobbico/900.pdf

• Search YouTube Videos for Dell PowerVault DR4100 Device
• Search Google for Dell PowerVault DR4100 Information
• Search Photo of Dell PowerVault DR4100 in Google Images
• Search Twitter for Dell PowerVault DR4100 News