TOTALINE Intellistat Owner's Manual

17, Advanced Setup Page 16 Adjust the number of hours the blower will run before the Service Filter icon appears on the display. 0 = off. Reset the Service Filter counter to 0, to remove the icon from the display. (0 - 1950) I8 Service Filter Setup 0 I7 Service Filter Setup 0 Press MO…

23, About Advanced Features & Operation Page 22 OUTDOOR SENSOR (Optional Accessory) - When connected to terminals RS+5, RS1, & RS GND on the back of the thermostat, the thermostat will read the temperature from the Outdoor not control to this sensor, it is…

8, TOTALINE Intellistat buttons. In any mode, adjust the desired Set Temperature with Pressing the up/down buttons in Auto mode will adjust both the heat and cool set temperatures simultaneously. Pressing the up/down buttons in Heat or Cool modes will adjust only the heat or cool set temperature. Select Desired T…

13, Programming 4 Time Periods Page 12 py 18:no co T : Select Yes or No to copy the previous day’s program to this day. Yes No If Yes is selected: If No is selected: Selecting Yes, then pressing mode will copy the previous day’s program and then will ask the same copy qu…

7, The HEAT setting indicates the temperature the room has to reach before the furnace will turn on to heat the room. The COOL setting indicates the temperature the room has to reach before the air conditioner will turn on to cool the room. OFF indicates both heating and air conditioning systems …