Toyotomi OM-148 Installation Manual

16, Rev. 11/06 Printed in Japan 4731003052 TOYOTOMI U.S.A., INC. 604 Federal Road, Brookfield, CT 06804 www.toyotomiusa.com This manual supersedes earlier editions. PART No.20476693 OM-148(in/E) 06.9.19 1:08 PM ページ a …

6, FUEL TANK INSTALLATION The fuel tank must be purchased separately and installed by a qualified fuel supply technician. NOTE: Fuel tank installation must comply with National Fire Protection Association Code NFPA 31 or local- ly applicable codes. Check with local building officials.…

13, PREPARATION 1. Make sure the flue pipe is installed properly. 2. Make sure the fuel tank is installed properly. Make sure there is no fuel leakage. 3. Make sure there is no water leaking from piping. (Plumbing) 4. Make sure electrical connections and grounding are wired properly. …

1, Instantaneous Oil-Fired Water Heater Installation Manual MODEL OM-148 (Type B) CONTENTS IMPORTANT THIS APPLIANCE SHOULD BE INSTALLED BY A LICENSED, AUTHORIZED PERSON(S) DUE TO THE NECESSITY OF MAKING ELECTRICAL, WATER AND FUEL CONNECTIONS. RETAIN THIS MANUAL FOR FUTURE REFERENCE. CHECK LOCAL CO…

3, Toyotomi OM-148 UNPACKING 1. Unpack the unit carefully. 2. Check to see if there are any loose screws that may have occurred in transit. 3. Take accessories and the instruction manual out of the carton. STANDARD INSTALLATION PARTS The following standard installation kits are available: • Outside venting Use Flue …

11, 10 NOTE: Make sure wall thickness is not greater than 10-1/2 inches. Flue pipe can be installed through any standard building materials. Please ask your local dealer or distributor for more details. 3. For standard installation, position the hole for the flue pipe. NOTE: The water he…