Flowserve Centrifugal Pump 8-UB-1 Manual, Installation & Operation Instruction

13, Flowserve Centrifugal Pump 8-UB-1 UB USER INSTRUCTIONS ENGLISH 71569247 07-04 Page 13 of 32 ® 4.4.2 Alignment methods Ensure pump and driver are isolated electrically and the half couplings are disconnected. The alignment MUST be checked. Although the pump will have been aligned at the factory it is most likely that this a…

21, UB USER INSTRUCTIONS ENGLISH 71569247 07-04 Page 21 of 32 ® Our specialist service personnel can help with preventative maintenance records and provide condition monitoring for temperature and vibration to identify the onset of potential problems. If any problems are found the following …

1, ® Pump Division Type: 8-UB-1 CENTRIFUGAL PUMP USER INSTRUCTIONS: INSTALLATION, OPERATION, MAINTENANCE PCN=71569247 07-04(E) (supercedes 6176/6511) These instructions must be read prior to installing, operating, using and maintaining this equipment. …

4, UB USER INSTRUCTIONS ENGLISH 71569247 07-04 Page 4 of 32 ® 1 INTRODUCTION AND SAFETY 1.1 General These Instructions must always be kept close to the product's operating location or directly with the product. Flowserve products are designed, developed and manufactured wit…

3, UB USER INSTRUCTIONS ENGLISH 71569247 07-04 Page 3 of 32 ® INDEX PAGE Additional sources (10.3)......................................... 31 Alignment of shafting (4.2, 4.4 and 4.6) Assembly (6.10)....................................................... 24 ATEX marking (1.6.4.2) ..........…

23, UB USER INSTRUCTIONS ENGLISH 71569247 07-04 Page 23 of 32 ® 1 – impeller 1 – diaphragm bush (optional: 2 - mechanical seals 2 - impeller wear rings) 6.5 Tools required A typical range of tools that will be required to maintain these pumps is listed below. Readily availabl…