Transition Networks C4TEF10XX-10X Operation & User’s Manual

3, 4 S4TEF10xx-10x 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- Continued Switch Set #1 - T1/E1 Options 5, 6, 7, 8 - Loop-Back Settings The loop-back setting is used for installation and network debugging procedures. Each of the T1/E1 ports can be i…

1, Transition Networks C4TEF10XX-10X * Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network. The chassis version of the media converter is C4TEF10xx-10x. For more information, see the user’s guide on-line at: www.transition.com. Installation . . . . . . . . .…

5, 8 S4TEF10xx-10x 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- Continued Install the T1/E1 Cable 1. Locate or build ITU-compliant copper cable with straight-through RJ-48 connectors installed at both ends. (See page 13 for the proper cabl…

7, 13 [email protected] -- Click the “Transition Now” link for a live Web chat. Cable Specifications -- Continued T1/E1 Cable Category 3: (minimum requirement) Connector: RJ-48C Electrical network connection: Single 4-wire (Tip/Ring - Tip1/Ring1) Mechanical arrangement: 8-pos…

11, Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - …

8, 14 S4TEF10xx-10x 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Technical Specifications For use with Transition Networks Model S4TEF10xx-10x or equivalent. Standards G.703, AMI/B8Zs/HDB3 Data Rate Fiber: 100 Mb/s Dimensions 3.7" x 4.7" x 1.8"…