Transition Networks FBRM1XXX-1XX Operation & User’s Manual

79, Transition Networks Section VIl: Operations Introduction This section explains the operational status LEDs and what they indicate, along with product features, and the three methods use to upgrade the firmware. In this section These are the topics: Topic See Page Stat…

65, Transition Networks FBRM1XXX-1XX Transition Networks Section V: FBRM/BFFG Device Management Device management via IP web-base (directly to Device), continued IP web-based management (continued) Step Action 5. Click the LOG IN button to bring up the main menu of the Device. See Figure 57. Note:…

14, Section I: FBRM/BFFG Product Description Transition Networks Hardware description, continued Front panel CFBRM The front panel of the CFBRM 1040-140 Devices has the following ports and LEDs: Ports Front Panel LEDs • Power (one) 100Base-FX SFP port • Link/Active 10/100 Ba…

89, Transition Networks Section Vll: FBRM/BFFG Operation Firmware upgrades, continued Accessing the bootloader CLI (continued) Step Action At the BOOT:> prompt type the letter “t” to establish TFTP as the reboot method. 3. At the BOOT:> prompt type the letter “s” to view…

130, Transition Networks Appendix C: Device Commands & Descriptions Command Descriptions arp Displays the arp cache. clear counter Clears counters on all ports or on a specific port. Usage: clearcounter [port=<portno>] cls Clears the screen. exit Exits the CLI/Tel…

25, Transition Networks Section II: Hardware Installation Introduction This section describes how to install the CFBRM and CBFFG Devices into a Point System chassis with a remotely managed SFBRM or CFBRM standalone Device. Also, shows how to install two SFBRM Devices or two SBFFG st…