Data: UPD 2nd February 2024
Fluke RPM4 Monitor PDF Installation Instructions (Updated: Friday 2nd of February 2024 10:25:36 AM)
Rating: 4.6 (rated by 60 users)
Compatible devices: 05-443, 1732, Victoreen 875 Operators, RPM4-AD, RPM3 - VERSION 2002, 1736, MOLBOX RFM, Victoreen 05-437 Operators.
Recommended Documentation:
Text Version of Fluke RPM4 Monitor Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 02 February 2024)
RPM4 is a trademark, registered and otherwise, of DH Instruments, Inc.
Document 560061b 041124
DH Instruments, Inc.
4765 East Beautiful Lane
Phoenix AZ 85044-5318
USA
Tel 602.431.9100
Fax 602.431.9559
[email protected]
www.dhinstruments.com
RPM4™
Rack Mount Kit
P/N 401929
Installation Instructions
RACK MOUNT KIT, P/N 401929, INCLUDES
QTY PART NO
FIGURE
CALLOUT DESCRIPTION
1 123699 1 Front panel
2 124155 2 Side bracket
4 100972-Z 3 M4 hex nut
4 102668-Z 4 M4 split lock washer
4 101016-Z 5 M4 x 12 SHC screw
4 100918-Z 6 M4 flat washer
1 123703 7 Rear support bracket
1 123764 8 Foam gasket
4 103448-Z N/A M3 x 12 self-tapping screw
INSTALLATION INSTRUCTIONS
Remove the four feet from the bottom of the
RPM4™ by removing the screw and then
removing the foot. Replace the screw with the
shorter M3 x 12 self-tapping screw included in this
kit. Repeat for the other three feet.
Place one side bracket (2) on each side of the RPM4.
Position each bracket with the front panel
attachment flange (flange with two holes) facing
the front of the RPM4.
Attach the front panel (1) to the side brackets (2)
using four M4 split lock washers (4) and four M4
hex nuts (3). Recommended torque is 3 Nm.
Remove adhesive backing from foam strip (8).
Adhere the foam strip to the rear support bracket
(7), centering the foam as shown in figure 2.
Attach the rear support bracket (7) to the side
brackets (2) using four M4 flat washers (6) and
four M4 X 12 SHC screws (5). Recommended
torque is 3 Nm.
For adequate support of the RPM4, the rear
support bracket (7) shall be supported on the side
rails of the rack system or by other means.
Figure 1. Rack Mount Kit
Figure 2. Rear Support Bracket and Foam
Recommended:
H3390, KSL 2401-40 -, 200 series, R300
1T-MV-8474, XM3-22w, C-19P, PULSOX-300, RMX 2000, HSD HG191D
-
ORDER NO.PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Roa ...
Model & Doc Type: PDP-42A3HD 138
-
Thank you for purchasing our MPDP.Please read through this user's manual for safety before installing this product.This product is manufactured for Multi Plasma display model only.• 2009.05.21A revolutionary MPDPInfinitely Expandable MPDPUser’s ManualOPM-4240 / OPM-4240RA ...
Model & Doc Type: OPM-4240 36
-
VA1912-LED/VA1912m-LEDVA1912a-LED/VA1912ma-LEDLCD DisplayUser GuideModel No. VS14758IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in ...
Model & Doc Type: VA1912-LED 27
-
PDP-503CMXPDP-433CMXPlasma DisplayÉcran à plasmaOperating InstructionsMode d’emploiContents related to system specifications, power requirements,accessories, and other information differ with respect to thecountry where this unit is purchased. For customers living in theU.S.A. or Canada, plea ...
Model & Doc Type: PDP-433CMX 44
Operating Impressions, Questions and Answers:
