Trek 11i Owner's Manual

6, Trek 11i 5 To set Clock 1. Cycle Mode to CLK. 2. Hold Mode . 3. Cycle Set to 12 or 24 hour clock. 4. Push Mode to select clock. 5. Cycle Set to the hour. 6. Push Mode to select. 7. Cycle Set to the minute. 8. Push Mode to select. The computer returns to current …

3, 2 INSTALLATION Tools needed: • Electrical tape • Slot-type screwdriver • Phillips-type screwdriver • Scissors This section explains the steps to install your computer onto your bicycle: • Placing the computer on the handlebar • Placing the magnet and sensor(s) on …

9, 8 CHANGING FUNCTIONS AND OTHER NORMAL USE These are everyday tasks that are not explained elsewhere in the manual. Changing mode Once the computer is programmed and installed, it is very easy to use. To change to different modes (functions), simply press the Mode button(s) at the bo…

5, 4 SETTING THE COMPUTER The computer must be set, or “programmed,” so that it gives its readout in the units preferred by the user, and so that it calculates with the correct wheel size. There are three ways to use the buttons: • Push- touch once • Cycle- push repeatedly …

2, 1 FUNCTIONS Not all Trek Incite computer models have all these functions. Table 1- Function abbreviations, names and explanations Function Explanation Speed Current speed of the bicycle displayed in miles per hour (MPH) or kilometers per hour (KPH). Highest readings: • 6i, 8i: 107.3…